|
Hardware Requirements |
  
|
|
Hardware Requirements |
|
rcServer Application
rcServer requires a PC that supports Microsoft Windows™ 95 OSR2, 98, ME, NT 4, 2000 or XP.
| • | a 100% IBM-compatible Pentium™ personal computer with a hard disk and a floppy drive. |
| • | 16MB RAM (Windows 95, 98, ME), 32MB RAM (NT), 64MB RAM (Windows 2000), 128MB RAM (XP). |
| • | 5MB free disk space (for this application only) |
| • | compatible VGA, super VGA, XGA or 8514/A monitor, with adapter, running 800x600 minimum display resolution |
| • | Microsoft mouse or compatible pointing device. |
| • | A LAN card (NIC), known to be working |
| • | A working serial port (COM port) |
| • | TCP/IP networking must be installed and bound the LAN card (NIC) |
Host DCS Unit
The host DCS unit must be running in CR (control room) mode and must have a working, available COM port. See the section on setting up your DCS machine for further details.
Host Maestro Unit
The host Maestro unit must be v3.0 or later and must have a working, available COM port. See the section on setting up your Maestro machine for further details.
Additional Hardware Needed
A "null modem" serial cable connecting the DCS or Maestro machine and the rcServer work station. For information on wiring the serial data connection between the two machines, see the section on Serial Interface.